[78-L] Acoustical playback (was: Old Geezers)

[Philip Carli]

And on the model A note, i have a 1953 Oldsmobile 98 that for a long time I drove as a regular car - and not that long ago.  Why not?  It has power steering, power brakes, a top end of around 100 - perfect for everything except $3.85/gal petrol.  A model A?  You shortchanged it.  Electric starting and lighting, top end of around 75 (in really good tune, and decent cruising at 55-60 before the front end dances), 20-23 miles to the gallon at the bottom end, and nippy handling.  (Henry used to take them out on the Ford test track and race 'em around at 60 and better - he really liked the car.)  Shortcoming (now able to ameliorate somewhat): mechanical 4-wheel brakes with small drums and a compensating system needing modest attention every few months.  That's why a lot of people happily drive them still, at least in the summer.  They are _automobiles_ of a usable type.

Now I wouldn't do the same with a 1913 Winton - finicky compressed air starter, acetylene lighting (rather powerful, though), top end of 80, but with two-wheel contracting band brakes that when wet are nearly useless.  An exhilarating 7-passenger potential deathtrap under the wrong circs.

Ours is not a steady progress of technology - it's more fits, starts, leaps, and backward falls, and (to mix metaphors), there is little entirely new under the sun.  Understand and appreciate it all. PC


________________________________________
From: 78-l-bounces at klickitat.78online.com [78-l-bounces at klickitat.78online.com] on behalf of Michael Biel [mbiel at mbiel.com]
Sent: Friday, March 23, 2012 9:27 AM
To: 78-L Mail List
Subject: [78-L] Acoustical playback (was: Old Geezers)

Matthew:
You probably have not seen this before, but we have discussed this in
the past.  When you play a record on an old acoustical phonograph you
are not playing the record, you are playing the phonograph.  The horn
resonances and reproducer characteristics overlays the distinctive sound
of that machine on any and all records you play on that machine.   If
you want to hear what is on the RECORD, this is not the way to do it.  A
modern electrical playback is the only way to do it.

Consider it like this: when I was a teenager a neighbor was able to buy
a mint condition Model A Ford.  We had a blast riding around in it
occasionally, but we did it to ride around in an antique car.  If we
wanted to actually go somewhere, we used a modern car.  Sure, if you
want to get a kick out of playing your own phonograph, go ahead and do
it -- but remember you are playing the machine, not the record.

Now, as for the care of your heirloom records, the reason why the
records collectors find are not  usually in mint or even E+ condition is
because people played them on acoustical machines -- not because they
WANTED to, but because that is what they HAD.  They wore the records
then, and especially if the reproducer has not been repaired, they will
wear the records now.  If you want to keep the records i the condition
they were in when you got them, don't play them on the acoustical
machine.  Play junkers on it -- sometimes worn records sound less-worn
on acoustical machines.  Occasionally play something you want to hear as
it sounded back then on the machine, but unless it is a common records,
don't do it too often.  And, of course, used a new needle EVERY TIME,
and NEVER, EVER, turn a needle in the reproducer, or use a needle you
found loose in an old machine.

You don't say what your machine is.  Unless it is an
Orthophonic/VivaTonal, or some other post 1925 machine, it was not meant
to play electrical recordings.  The machines that were continued to be
made in India, USSR, China, etc, WERE meant to play electrical records
-- which is why Crapophones can sometimes sound great -- but a
pre-electric machine was not meant to play electrical recordings, even
late Chinese records.  As for your specific question,   I would never,
ever, play a Bluebird or any other 1930s record on an acoustical
machine, even an Orthophonic.  They also were obsolete by then.

Over the decades I (and most of the rest of us old geezers) have learned
that there are three kinds of collectors: 1) record collectors who might
have a few phonographs just for the hell of it (but don't really care
that much about machines), 2) machine collectors who have a few records
just so they have something to play on their phonographs (and mainly
otherwise don't care about records at all), and 3) collectors who have a
fair amount of both machines and records, appreciate them both, and
therefore don't abuse their records by overplaying them on machines
except as demonstrations.   I actually had a type 2 collector say to me
that he saw no difference between different records, but that the shelf
full of seemingly identical Columbia cylinder machines were fascinating
because some had three motor mounting screws but the next one had four,
and other such minor production-line changes.  He saw no value in the
wooden crate of mint white-label Zonophone single-sided test pressings
other than he could sell them to Zonophone machine owners who didn't
care which Zonophone records they put on their machines to display.  He
saw no reason to make a discographical listing before scattering them to
the winds to be worn out by Zonophone collectors.

I hope you understand what I am saying and I hope you are a type #3, or
maybe a #1 like me and most of us here.

Mike Biel  mbiel at mbiel.com

On 3/22/2012 10:48 PM, Matthew Balcerak wrote:
> I'm 25, and definitely a lurker.  I am full of "stupid questions" but I
> usually try to get them answered elsewhere before I bother this esteemed
> body.
>
> On that note, I have one for you all.  I have not discovered a definitive
> answer about steel needles.  I have a variety of different gramophone, and
> of course a modern turntable.  I've read: acoustic recordings sound better
> with medium tone needles, electric recordings with soft tone, and if you
> want you can mix and match for loudness however you want.  Using that as a
> rule of thumb has been great for all my early records.  However, when do I
> have to stop using steel needles and only use an electric pickup?  Thus
> far, if the record hasn't been orthophonic (or one of their breed) or
> before, I've kept it off a gramophone.  Everything afterword, I've used a
> modern turntable.  I know they produced gramophones well into the forties,
> and in some countries into the sixties.  Does this mean I can throw my
> later Chinese records onto a gramophone and be OK?
>
> Also, is it different for different labels?  Do bluebirds handle better on
> gramophones than okehs?  I have read that records have a grinding agent in
> the opening grooves to make the steel needles ideal for the individual
> record.  When did they stop doing this?  Will this grinding agent effect a
> modern turntable stylus?
>
> Essentially, with at least fifty years of play time ahead of me, I don't
> want to leave my grand kids with a bunch of old coasters.
_______________________________________________
78-L mailing list
78-L at klickitat.78online.com
http://klickitat.78online.com/mailman/listinfo/78-l

________________________________

This email message and any attachments may contain confidential information. If you are not the intended recipient, you are prohibited from using the information in any way, including but not limited to disclosure of, copying, forwarding or acting in reliance on the contents. If you have received this email by error, please immediately notify me by return email and delete it from your email system. Thank you.