[78-L] Edge Bite

[Ron L'Herault]

Ah, but we are talking about an edge chip that does not intrude on the
grooves here.  It is more cosmetic than anything and could be 'recreated' by
multiple applications of nail polish if needs be.  I would not try gluing a
cookie bite in grooves with Duco.

Ron L

-----Original Message-----
From: 78-l-bounces at klickitat.78online.com
[mailto:78-l-bounces at klickitat.78online.com] On Behalf Of David Lennick
Sent: Tuesday, May 03, 2011 10:34 AM
To: 78-L Mail List
Subject: Re: [78-L] Edge Bite

As I say..scotch tape is reliable and correctable. Remember the "Plantation 
Scene" sound track disc that had to be re-broken so it could be lined up
correctly?

There are still some records from my parents' collection that were glued .. 
they're unplayable. Proves that the missing piece still exists, but that's
it.

dl

On 5/3/2011 10:18 AM, Cary Ginell wrote:
>
> I've always had trouble with this, even with a razor blade. It never fully
removes the glue on the surface and ends up damaging the record. I've tried
with a few junk records, but haven't tested it on something that was
important yet.
>
>> From: lherault at bu.edu
>> To: 78-l at klickitat.78online.com
>> Date: Tue, 3 May 2011 10:07:09 -0400
>> Subject: Re: [78-L] Edge Bite
>>
>> I imagine you could use a straight razor blade to shave off the excess.
If
>> I can find a suitable subject, maybe I'll do the experiment.
>>
>> Ron L
>>
>> -----Original Message-----
>> From: 78-l-bounces at klickitat.78online.com
>> [mailto:78-l-bounces at klickitat.78online.com] On Behalf Of Cary Ginell
>> Sent: Tuesday, May 03, 2011 9:39 AM
>> To: 78-l at klickitat.78online.com
>> Subject: Re: [78-L] Edge Bite
>>
>>
>> Duco cement bonds great, but it's difficult not to get any of it to seep
>> through to the surface once the two pieces are forced together. Any
advice
>> on how to do this?
>>
>> Cary Ginell
>>
>>> Date: Tue, 3 May 2011 09:35:08 -0400
>>> From: dlennick at sympatico.ca
>>> To: 78-l at klickitat.78online.com
>>> Subject: Re: [78-L] Edge Bite
>>>
>>> I have always used good old Scotch Tape, as long as you stay away from
the
>>
>>> grooves (easy to do) and you aren't covering a needed run-in. Magic Tape
>> (Green
>>> tartan) has held for decades on records I used it on ages ago. It's also
>>> reversible and correctable and doesn't run the risk of glue bleeding or
>> getting
>>> on the surface.
>>>
>>> dl
>>>
>>> On 5/3/2011 9:28 AM, marimbamoods at comcast.net wrote:
>>>> hi all, i have a shellac 78 with a small edge bite, (not into grooves)
>> and i still have the small piece of shellac that broke off. any idea what
>> adhesive / technique might work to attach the missing piece back in
place?
>> it is a clean edge-break, within only the smooth outer area.
>>>>
>>>>
>>>> thanks for helping.
>>>>
>>>>
>>>> david harvey
>>>> ___________________________
_______________________________________________
78-L mailing list
78-L at klickitat.78online.com
http://klickitat.78online.com/mailman/listinfo/78-l