[78-L] Speaking of portable equipment/cutter back in 1940?

[Milan P Milovanovic]

Yes, right, I know about this recording, have to CD reissues of this 
material.

As I understand Presto cutting lathes, with pro equipment and pro blanks 
(nitrates, lacquers, not acetate blanks) and especially ribbon microphones 
really was perfect match to capture full, rich sound, rarely heard even 
today with 64 chanell mixing console, multitracking, hi res and so on.

I really like the sound they produced way back then. This is the way the big 
band should sound (to my ears).

Milan


----- Original Message ----- 
From: "simmonssomer" <simmonssomer at comcast.net>
To: "78-L Mail List" <78-l at klickitat.78online.com>
Sent: Sunday, August 23, 2009 3:06 AM
Subject: Re: [78-L] Speaking of portable equipment/cutter back in 1940?


>
> ----- Original Message ----- 
> From: "Milan P Milovanovic" <milanpmilovanovic4 at gmail.com>
> To: <78-l at 78online.com>
> Sent: Saturday, August 22, 2009 7:40 PM
> Subject: [78-L] Speaking of portable equipment/cutter back in 1940?
>
>
>> Dear list members,
>>
>> about 3 years ago, I've heard interesting story about Norman Chalfin, who
>> recorded sound for Hurston Beaufort expedition. Norman Chalfin was "audio
>> technician who had accompanied Hurston and Belo to South Carolina to
>> record
>> the music, religion and language of a people before their heritage and
>> culture were lost to history".
>>
>> Also, he recorded one night club appearance of great Lester Young, in
>> December 29, 1940.
>>
>> All those information I found here:
>> http://www.loc.gov/loc/lcib/0605/young.html
>>
>> Now, my question is: what, way back then 1940. was portable equipment?
>> Were
>> those cutter machines/lathes designed for 16" blank inserts? "Audiodisc"
>> sample as shown on photograph - was it amateurish or pro? If it was
>> professional disc, how come that it was used on portable equipment?
>>
>> Judging from what can be heard from Lester Young clip (here:
>> http://www.npr.org/templates/story/story.php?storyId=5344114), it is so
>> well
>> recorded with rather clear frequency response down to the lowest register
>> (bass drum) and way up in highest sounds of cymbals and hi-hat.
>>
>> Thank you,
>>
>> Milan Milovanovic
>>
> In Nov. 7, 1940 Jack Towers recorded a Duke Ellington dance date from the
> Crystal Ballroom in Fargo, North Dakota in its entirety.
> He used Presto-Y Recorder using  16" aluminum based "acetates" recorded at
> 33 1/3 RPM from the inside out.(15 minutesp per side)
> The mikes were RCA 77C, an RCA Pressure Dynamic (solos) and an  RCA Junior
> Velocity (ribbon)
> There were 2 microphone inputs on the Presto plus a pre-amp unit plugged
> into an additional remote input on the Presto.
> Frequency response is very fine. Much better than the commercial releases 
> of
> the era (naturally as  all reissues were re-mastered from the original
> discs.
> and first generation tape transfers.
>
> Al Simmons
>
> _______________________________________________
> 78-L mailing list
> 78-L at klickitat.78online.com
> http://klickitat.78online.com/mailman/listinfo/78-l